C
alifornia Radio Control Jet Association
O.K. People, send mail to:CRCJA@AOL.COM.
To Suscbibe to the RC-JET List send and email to RC-JETS-ON@LISTS.KIDSOURCE.COM
So I bought a second hand Skymaster F-15 From Gary Z. and id you can see from this Picture, the Blue is WAY OFF
gary had taken care of the blue situation, BUT NO, Instead of flying it like that I listen to Mr. Scale, Herny and cut out the Flaps and Ailerons.
Here the boxes are already cut out for the Ailerons and Flap servos.
Here the new parts are hinged, but that is when I realized that there was not enough wood to hold the hinges, so I inserted blocks of wood half inch by one inch into every hinge location.
Stuffed 9411 in the Ailerons I think this are TamJets mount but can be sure.
Futaba 9204 for Flaps.
Make sure you have a good mount for the servo mounts. I make grooves in a criss cross pattern and make sure I glue it to part of the former.
Picture Gallery Page 1
Home
This site is maintained By
Ralph "Turbulence"Salgado
Revised November 22, 2004 ; © CRCJA
Comments, questions, suggestions 
CRCJA@AOL.COM.
